Working in pairs, our rotators lift and turn a bogie to provide access to all areas in an ergonomic and safe manner.
Electrically driven screws with bronze load and safety nuts provide the lift. The screws’ non-reversing system supports the load at all times, whilst the nut is fitted with an automatic lubricator and wear detector.
Mechan rotators can be designed to suit your needs. They comprise, rotating faceplates to offer complete access to the bogie at a comfortable working height, modified feet for a wide and stable base and synchronised jacks to ensure simultaneous lift.
The master jack is fixed to the floor using conventional studs and the single panel controller is attached to its rear. The slave jack is then mounted on guide rails to enable the fitting and removal of the bogie frame between the two units.